PRE-RIDE INSPECTION
Always inspect and confirm the safe operating condition of your vehicle prior to
ride. Always follow the maintenance schedule described in this Operator's Guide.
Perform a pre-ride inspection before each ride to detect any potential prob-
lem that could occur during operation. The pre-ride inspection can help you
monitor component wear and deterioration before they become a problem.
Correct any problem that you discover to reduce the risk of a breakdown or
crash. See an authorized Can-Am dealer as necessary.
Before using this vehicle, the operator should always perform the following
pre-ride inspection check list.
Pre-Ride Inspection Check List
What to Do Before Starting the Engine (Key OFF)
ITEMS TO BE
INSPECTED
Tires
Wheels
Radiator
Front grill kit
Engine oil
Coolant
Engine Air filter
CVT Air filter
Drive shaft boots
_______
12
WARNING
INSPECTION TO PERFORM
Check tire pressure and condition.
– Front: MIN 90 kPa (13 PSI), LOADED 103 kPa (15 PSI)
– Rear: MIN 110 kPa (16 PSI), LOADED 145 kPa (21 PSI)
Check wheels for damage and for abnormal play, and
check lug nuts are tightened.
Check radiator for cleanliness.
Slightly push on top of front right inner fender and inspect
front grill kit for cleanliness.
Check engine oil level.
Check coolant level.
Inspect the engine air filter.
Inspect the CVT air filter (when riding in severe conditions).
Check drive shaft boots and protectors condition.
SAFETY INFORMATION
________
✔