Can-Am DS 250 Operator's Manual page 92

MAINTENANCE PROCEDURES
vmo2006-014-015_a
Step 1: Pull front tab from grommets
Step 2: Lift cover to remove
Add coolant up to MAX. mark if re-
quired. Use a funnel to avoid spillage.
Do not overfill.
Properly reinstall and tighten filler cap.
Reinstall front fender access cover.
If the coolant is added in the coolant
reservoir, check the level in the radia-
tor too. Add coolant if necessary.
WARNING
In order to avoid potential burns,
do not remove the radiator cap if
the engine is hot.
NOTE: A cooling system that fre-
quently requires coolant is an indica-
tion of leaks or engine problems. See
an authorized Can-Am dealer.
To gain access to the radiator, remove
front fender access cover (see proce-
dure above).
______________
90
vmo2006-014-031_a
TYPICAL
1. Radiator cap
2. Coolant reservoir cap
Engine Coolant Replacement
WARNING
In order to avoid potential burns,
do not remove the radiator cap or
loosen the coolant drain plug if the
engine is hot.
Remove front fender access cover.
Turn the radiator cap counterclockwise
and remove it.
vmo2006-014-031_b
1. Radiator cap