Body/Frame; Recovery Hook Condition; Frame Fasteners; Seat Fasteners - Can-Am Renegade 500 Operator's Manual

Table of Contents

Advertisement

BODY/FRAME

Recovery Hook Condition

Check tightness of fasteners. Proper-
ly retighten as necessary.

Frame Fasteners

Check fastener condition and tight-
ness on the vehicle. Retighten as
required.

Seat Fasteners

Remove seat(s) and/or storage box
and check latch mechanisms and pins
for wear. See an authorized Can-Am
distributor/dealer for parts replace-
ment if damaged.
While reading this Operator's Guide, remember that:
Indicates a potential hazard that, if not avoided, could result in serious in-
jury or death.
_____________________
126
Vehicle Cleaning and
Protection
Never use a high pressure washer to
clean the vehicle. USE LOW PRES-
SURE ONLY (like a garden hose).
High pressure can cause electrical or
mechanical damages.
Painted parts which are damaged
should be properly repainted to pre-
vent rust.
When required, wash the body with
hot water and soap (only use mild de-
tergent). Apply non-abrasive wax.
CAUTION: Never clean plastic parts
with strong detergent, degreasing
agent, paint thinner, acetone, etc.
WARNING

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Renegade 800Renegade 800 x

Table of Contents