Body; Frame - Can-Am DS 450 EFI X mx Operator's Manual

SERVICE LIMITS
Brake pads thickness
Discs thickness
Maximum discs
warpage
See your authorized Can-Am dealer if
a problem is detected concerning the
brake system.
WARNING
The brake fluid replacement or
brake system maintenance and
repairs should be performed by an
authorized Can-Am dealer.

Body

Vehicle Cleaning and Protection
Never use a high pressure washer to
clean the vehicle. USE LOW PRES-
SURE ONLY (like a garden hose).
High pressure can cause electrical or
mechanical damages. Wrap-up muf-
fler tip to avoid water infiltration in the
exhaust system.
Painted parts which are damaged
should be properly repainted to pre-
vent rust.
When required, wash the body with
hot water and soap (only use mild de-
tergent). Apply non-abrasive wax.
NOTICE
Never clean plastic parts
with strong detergent, degreasing
agent, paint thinner, acetone, etc.
Seat Latch
Remove seat and check latch mecha-
nism. See an authorized Can-Am deal-
er for parts replacement if damaged.

Frame

1 mm
Frame Inspection
Check frame for cracks or other dam-
3.5 mm
age. See an authorized Can-Am dealer
for replace or repair.
0.2 mm
Check fastener condition and tight-
ness on the vehicle. See an authorized
Can-Am dealer for torque specifica-
tions, parts replacement or repairs.
______________
MAINTENANCE PROCEDURES
119