Wireless Mac Filtering - TP-Link TL-WR841N User Manual

Chapter 4 Configure
4. 4. 3. Wireless MAC Filtering
Wireless MAC Filtering is used to deny or allow specific wireless client devices to access
your network by their MAC addresses.
1 want to:
Howcan 1
do that?
Deny or allow specific wireless client devices to access my
network by their MAC addresses.
For example, you want the wireless client A with the MAC
address OO-OA-EB-B0-00-0B and the wireless client B with the
MAC address OO-OA-EB-00-07-SF to access the router, but other
wireless clients cannot access the router.
1. Visit http://tplinkwifi.net, and log in with the username and
password you set for the router.
2. Go to Wireless
>
Wireless MAC Filtering.
3. Click Enable to enable the Wireless MAC Filtering function.
4. Select Allow the stations specified by any enabled entries in
the list to access as the filtering rule.
5. Delete or disable all entries if there are any entries already.
6. Click Add New and fill in the blanks.
Add or Modify Wireless MAC Address Filtering entry
MAC Add
ress:
1
OO-OA-EB-00-07-SF
Destripüon:
1
Client B
:======;---~
Status:
~abled ~
Save J [ Back
1 ) Enter the MAC address OO-OA-EB-BO-OO-OB/00-0A-EB-00-
07-SF in the MAC Address field.
2) Enter wireless client A/B in the Description field.
3 ) Leave the status as Enabled.
4) Click Save and click Back.
7. The configured filtering rules should be listed as the picture
shows below.
Frltenng Rules
fi
Deny the siations specified by any enabled entries in the lisi Io acces.s
@ AUow the stations specified by anyenabled entries in the listto access.
ID ~AC Address
1 0 0-0A·ES.BO-OO-OB
2 00-0A·EB-00-07-5F
Status
Enabled
Enabled
( Add New...
J (
Enable Ali
J (
Di>able Ali
J (
Delete Ali
J
Description
Client A
Cliente
Modify
MQQlli:Qee~
~Qg_e~
31