Host - TP-Link TL-WR902AC User Manual

Click Add New... button to add a new rule as follows:
5.
In Rule Name field, create a name for the rule. Note that this name should be unique, for

example Rule_1.
In Host field, select Host_1.

In Target field, select Target_1.

In Schedule field, select Schedule_1.

In Action field, select Allow.

In Status field, select Enabled.

Click Save to complete the settings.

Then you will go back to the Access Restriction Rule Management page and see the following list.

4.9.2 Host

Choose menu "Access Control → Host", you can view and set a Host list in the screen as
shown below. The host list is necessary for the Access Restriction Rule.
Host Description - Here displays the description of the host and this description is unique.

Information - Here displays the information about the host. It can be IP or MAC.

Modify - To modify or delete an existing entry.

To add a new entry, please follow the steps below.
Click the Add New... button.
1.
2. In the Mode field, select IP Address or MAC Address.
If you select IP Address:

1) In Host Description field, create a unique description for the host (e.g. Host_1).
TL-WR902AC AC750 Wireless Travel Router
- 76 -