Ip-Pt (Ip Proprietary Telephone) - Panasonic KX-TDA50 Feature Manual

2.11.6 [5-4] External Relay—COS Number
PT Programming Manual
None
Feature Manual References
1.3.19 COS (Class of Service)

1.9.15 IP-PT (IP Proprietary Telephone)

Description
This PBX supports the connection of IP proprietary telephones (IP-PTs), which function almost identically
to normal PTs. However, they connect to the PBX over a Local Area Network (LAN), and send and receive
calls using Internet Protocol (IP).
IP-PTs have two Ethernet ports for connection, primary and secondary. They are connected to the PBX
through a network hub or other splitting device, and can have a PC connected to the secondary Ethernet
port.
This feature is only available for the KX-TDA100, KX-TDA200, and KX-TDA600.
[Connection Example]
PBX
IP-EXT
Main Office
Conditions
• Hardware Requirement: An IP-EXT card
• IP-PT registration is required through system programming before an IP-PT can be used with the PBX.
An IP-PT cannot be used unless an extension number is assigned. For details on how to register IP-
PTs, see the Installation Manual.
• The following features cannot be used with an IP-PT:
– XDP (→ 1.13.2 Paralleled Telephone)
– Digital XDP (→ 1.13.2 Paralleled Telephone)
– OHCA (→ 1.12.3 OHCA (Off-hook Call Announcement))
– Walking Extension (→ 1.20.2 Walking Extension)
– Using PC Phone or PC Console on a connected PC (→ 1.13.5 PC Console/PC Phone)
• The KX-NT265 does not have a secondary Ethernet port.
Private IP
Network
IP-PT
(KX-NT136)
Primary
Secondary
Ethernet Port
Ethernet Port
IP-PT
PC
Branch Office
1.9 I
IP-PT
Feature Manual 163