Panasonic KX-TDA50 Feature Manual page 104

1.6 F
Button
Terminate
External Feature Access (EFA) Used to send a flash/recall signal to the telephone company or host
Call Park
Call Park (Automatic Park
Zone)
Call Log
Log-in/Log-out*
Hurry-up
Wrap-up*
System Alarm
Time Service*
Answer
Release
Toll Restriction
Calling Line Identification
Restriction (CLIR)*
Connected Line Identification
Restriction (COLR)
Headset
Time Service Switching Mode
(Automatic/Manual)*
Two-way Record
Two-way Transfer
104 Feature Manual
Used to disconnect the current call and make another call without
hanging up. (→ 1.6.2 Flash/Recall/Terminate)
PBX to access external features. (→ 1.5.1 EFA (External Feature
Access))
Used to park or retrieve a call in a preset PBX parking zone. (→ 1.3.5
Call Park)
Used to park a call in an idle PBX parking zone automatically. (→ 1.3.5
Call Park)
Used to show a log of received calls. (→ 1.3.3 Call Log, Incoming)
Used to switch between Log-in and Log-out status. (→ 1.9.3 ICD Group
Features—Log-in/Log-out)
Used to redirect the longest waiting call in the queue of an ICD group to
the overflow destination. (→ 1.9.6 ICD Group Features—Queuing)
Used to switch between Wrap-up/Not Ready and Ready modes. (→
1.9.3 ICD Group Features—Log-in/Log-out)
Used to display a PBX error. (→ 1.10.4 Local Alarm Information)
Used to change or display the current time mode (day/lunch/break/
night). (→ 1.17.5 Time Service)
Used to answer an incoming call. (→ 1.8.3 Headset Operation)
Used to disconnect the line during or after a conversation, or to
complete a Call Transfer. (→ 1.8.3 Headset Operation)
Used to change the Toll Restriction (TRS) level of other extension users
temporarily. (→ 1.4.4 Dial Tone Transfer)
Used to switch between CLIP and CLIR service. (→ 1.3.13 CLIP
(Calling Line Identification Presentation), → 1.13.20 Private Network
Features—QSIG—CLIP/COLP (Calling/Connected Line Identification
Presentation) and CNIP/CONP (Calling/Connected Name Identification
Presentation))
Used to switch between COLP and COLR services. (→ 1.13.20 Private
Network Features—QSIG—CLIP/COLP (Calling/Connected Line
Identification Presentation) and CNIP/CONP (Calling/Connected Name
Identification Presentation))
Used to turn headset mode on/off while idle.
Used to switch between hands-free mode and headset modes during a
conversation. (→ 1.8.3 Headset Operation)
Used to switch between Automatic Switching and Manual Switching
mode. (→ 1.17.5 Time Service)
Used to record a conversation into your own mailbox. (→ 1.19.4 Voice
Mail DPT (Digital) Integration)
Used to record a conversation into the mailbox of a specified extension.
(→ 1.19.4 Voice Mail DPT (Digital) Integration)
Usage