Panasonic KX-TDA50 Feature Manual page 194

1.13 P
Password
PC System Password (PC) for
User
System Password (PC) for
Administrator
System Password (PC) for
Installer
The three programmer codes used for PC programming can be set through Maintenance Console, using
the 2.4.6 Tool—Programmer Code Change option. For more information about programmer codes, see
Section 2.1.2 Access Levels in the PC Programming Manual. The required format of each code is as follows:
User Level Programmer Code
Administrator Level Programmer Code
Installer Level Programmer Code
Warning to the Administrator or Installer regarding the system password
1.
Please provide all system passwords to the customer.
2.
To avoid unauthorized access and possible abuse of the PBX, keep the passwords secret, and
inform the customer of the importance of the passwords, and the possible dangers if they become
known to others.
3.
The PBX has default passwords preset. For security, change these passwords the first time that
you program the PBX.
4.
Change the passwords periodically.
5.
It is strongly recommended that passwords of 10 numbers or characters be used for maximum
protection against unauthorized access. For a list of numbers and characters that can be used in
system passwords, refer to Section 1.1.2 Entering Characters in the PC Programming Manual.
6.
If a system password is forgotten, it can be found by loading a backup of the system data into a
PC, and checking the password using the Maintenance Console software. If you do not have a
backup of the system data, you must reset the PBX to its factory defaults and reprogram it.
Therefore, we strongly recommend maintaining a backup of the system data. For more information
on how to back up the system data, refer to the PC Programming Manual.
However, as system passwords can be extracted from backup copies of the system data file, do
not allow unauthorized access to these files.
Programming References
PC Programming Manual
1.1.2 Entering Characters
2.1.2 Access Levels
2.4.6 Tool—Programmer Code Change
2.17.1 [11-1] Main—Password
194 Feature Manual
Used with the user-level programmer code to access user-
level PC programming. The installer can specify which
system programming settings are available.
Used with the administrator-level programmer code to
access administrator-level PC programming. The installer
can specify which system programming settings are
available.
Used with the installer-level programmer code to access
installer-level PC programming. All system programming
settings are available.
Item
Description
Length
0 – 16 characters
4 – 16 characters
4 – 16 characters
Format
4 – 10
characters