Panasonic KX-TDA50 Feature Manual page 80

Hide thumbs Also See for KX-TDA50:
Table of Contents

Advertisement

1.4 D
2.12.1 [6-1] System Speed Dial
→ CO Line Access Number + Telephone Number
→ CLI Destination
In this example, calls received on CO line 01 are routed to the DISA OGM with floating extension number
501. If the number of the received call (after modification according to the Caller ID table) is "1-234-111-
5678", the call originator is recognized as extension 200, and the Walking COS feature is automatically
activated.
System programming is required to enable this feature.
SMDR
The call information for DISA is recorded as the one of the DISA floating extension numbers. (→ 1.16.1
SMDR (Station Message Detail Recording))
Conditions
WARNING
There is a risk that fraudulent telephone calls will be made using the CO-to-CO Line Call feature of
DISA.
The cost of such calls will be billed to the owner/renter of the PBX.
To protect the PBX from this kind of fraudulent use, we strongly recommend:
a)
Enabling DISA security (CO Line Security or All Security).
b)
Keeping passwords (verification code PINs/extension PINs) secret.
c)
Selecting complex, random PINs that cannot be easily guessed.
d)
Changing PINs regularly.
Hardware Requirement:
KX-TDA50: An MSG card
KX-TDA100/KX-TDA200/KX-TDA600: An OPB card and MSG card
DISA Delayed Answer Time
It is possible to set the Delayed Answer time so that the caller will hear a ringback tone within a
preprogrammed time period first before hearing an outgoing message (OGM).
→ 2.8.4 [2-3] Timers & Counters—DISA / Door / Reminder / U. Conf—Recall—Hold Recall
→ [209] DISA Delayed Answer Time
Call Retry
While hearing a ringback, reorder, or busy tone, retrying the call is possible by pressing " ". System
programming selects whether pressing " " during a CO-to-CO line conversation returns to the DISA
top menu or sends a DTMF tone.
DISA Mute Time
It is possible to set the Mute time until the outgoing message (OGM) plays and the PBX starts to receive
the DTMF signalling after the caller reaches the DISA line.
→ 2.8.4 [2-3] Timers & Counters—DISA / Door / Reminder / U. Conf—DISA—Mute & OGM Start Timer
after Answering
End of Call Detection
If a call through DISA is routed to a CO line, DISA can be used to detect the end of the call. This function
can be disabled through system programming. If disabled, DISA is released when the CO-to-CO line
connection is made.
2.11.3 [5-3-1] Voice Message—DISA System—Option 1
→ CO-CO with DISA—DISA to Public CO
→ CO-CO with DISA—DISA to Private Network
80
Feature Manual

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tda100Kx-tda600Kx-tda200

Table of Contents