Panasonic KX-TDA50 Feature Manual page 292

1.17 T
3.
The call is directed to extension 150, which is a floating extension number used by the VPS
(programming not shown here).
4.
Holiday Mode
The PBX can also accommodate 24 different holidays. The start and end date of each holiday can be
programmed, and all holidays are assigned a single time mode. For example, if the "night" mode is
assigned as the time mode for holidays, and a holiday begins December 31st and ends January 1st, all
PBX features will use their "night" settings from 0:00 A.M. on December 31st until 0:00 A.M. on January
1st.
5.
Time Service Button
A flexible button can be customized as one of the following Time Service buttons:
a)
Day/Night button
b)
Day/Night/Lunch button
c)
Day/Night/Break button
d)
Day/Night/Lunch/Break button
These buttons can be used to switch the current time mode: pressing the Day/Night button will toggle
between the day and night modes, for example.
Each Time Service button will display the current time mode using a different light pattern or color, as
shown below.
Light Pattern
Off
Red on
Green on
Slow green flashing
Slow red flashing
Note
Pressing a Time Service button will change the current time mode only if the COS assigned to the
extension is authorized to do so or if the extension is assigned as a manager. All other extension
users can press this button on their proprietary telephones (PTs) to display the current time mode.
Conditions
• The start times of the following time modes can be specified through PC programming as well as PT
programming.
– Day 1 and 2
– Lunch
– Night
The start and end times of the following break modes can be specified through PC programming only.
– Break 1
– Break 2
– Break 3
Note that if an end time is programmed for a break, the day mode will start or resume at this time, as
shown previously in "Visualization of Time Schedule for Tenant 1" example. If no end time is
292 Feature Manual
Current Time Mode
Day
Night
Lunch
Break
Holiday