Panasonic KX-TDA50 Feature Manual page 111

Call Waiting/DND Override
Executive Busy Override
Message Waiting set
Call Monitor
Automatic Callback Busy
Alternate Calling—Ring/Voice
*: To use Call Waiting/DND Override, both "1" and "2" are available by default.
3.
Fixed Numbering (available while dialing or talking)
Features which are available while dialing or talking have fixed numbers, as shown in the following table:
[Fixed Numbering Table (available while dialing or talking)]
Pulse to Tone Conversion
Conference
Door Open
Conditions
[General]
• The following are examples of feature number conflicts: 1 and 11, 0 and 00, 2 and 21, 10 and 101, 32
and 321, etc.
• Feature number + Additional number (Parameter)
Certain flexible feature numbers require additional digits to make the feature active. For example, to set
Call Waiting, the feature number for "Call Waiting" must be followed by "1" and to cancel it, the same
feature number should be followed by "0".
• Rotary single line telephone (SLT) users cannot dial feature numbers which include " " or "#".
• Portable station (PS) users cannot use the following features:
– Personal Speed Dialing
– OGM playback/record
– S-CO Line Access
– Parallel Telephone Mode set/cancel
– Walking Extension
– BGM set/cancel
– Timed Reminder
[KX-TDA600]
• Note that extensions that will have a mailbox using a VM in DPT integration must have extension
numbers of 2 to 4 digits.
• A PS can only be assigned an extension number of 4 digits or less.
Feature
Feature
1.6 F
Default
1 or 2*
3
4
5
6
Fixed Numbering
3
5
Feature Manual 111