Panasonic KX-TDA50 Feature Manual page 78

1.4 D
Security Mode
All Security
CO Line Security
No Security
: Available
If CO line call is available, Account Code Entry (→ 1.1.2 Account Code Entry) is also available.
* :
Note
DISA AA service and Operator Call (→ 1.12.5 Operator Features) are available for any security mode.
Security Mode Override by Verification Code Entry
If the caller performs Verification Code Entry (→ 1.19.1 Verification Code Entry) while hearing a DISA
message, the security mode can be temporarily changed to No Security mode.
Entry method:
Verification Code Entry feature number +
After changing mode, the new mode remains in force for the duration of the call.
DISA Intercept Routing—Busy/DND
If the destination called by the outside party is busy or in DND mode, and if (1) the busy destination does
not set Call Waiting, FWD, or Idle Extension Hunting or (2) the destination is in DND mode and Idle
Extension Hunting is not available, one of the following can be selected through system programming:
a)
Busy Tone: Busy tone is sent to the caller.
b)
Intercept Routing: Intercept Routing—Busy/DND will work and the call will be redirected to the
preprogrammed destination.
c)
Outgoing Message (OGM): An outgoing message (OGM) will be sent to the caller. The message
for busy/DND mode can be assigned for each outgoing message (OGM) which has a DISA floating
extension number.
2.11.3 [5-3-1] Voice Message—DISA System
→ DISA Intercept—Intercept when Destination through DISA is Busy
→ DISA Intercept—Intercept when Destination through DISA sets DND
DISA Intercept Routing—No Answer
If a destination is not available to answer a DISA call within a preprogrammed time period (DISA Intercept
time) after the call is reached, the call will be redirected to the programmed destination by the Intercept
feature.
If the intercept destination is not available to answer the call within a preprogrammed time period (DISA
Disconnect Time after Intercept) after the DISA Intercept time expires, the call will be disconnected.
2.8.4 [2-3] Timers & Counters—DISA / Door / Reminder / U. Conf
→ DISA—Intercept Timer—Day, Lunch, Break, Night
→ DISA—Disconnect Timer after Intercept
→ 2.9.1 [3-1-1] Trunk Group—TRG Settings—Intercept—Intercept Destination—Day, Lunch, Break, Night
→ 2.10.1 [4-1-1] Wired Extension—Extension Settings—Option 1—Intercept Destination—Day, Lunch,
78 Feature Manual
Intercom
Call
Without PBX Code
+ verification code + verification code PIN
TIE Line Call
With PBX Code
CO Line Call
*