Programming The Ip Proprietary Telephone; Assigning The Ip Addressing Information - Panasonic KX-TDA50 Manual

4.2 Programming the IP Proprietary Telephone

4.2 Programming the IP Proprietary Telephone
4.2.1

Assigning the IP Addressing Information

When Assigning IP Addresses to IP-PTs Using a DHCP Server
When using a DHCP server to automate IP address assignment of IP-PTs, only the IP address of the IP-
EXT card (PBX IP address) must be entered manually.
Other addresses (i.e., the IP address of the IP-PT, the subnet mask address, and the default gateway
address) will be assigned automatically by the DHCP server.
Follow the procedure below for all IP-PTs on the LAN that a DHCP server is used.
If you need to set VLAN parameters, follow the procedure described in "4.2.2 Setting the VLAN Parameters"
after assigning the IP addresses without ending programming.
IP-PTs with a multiline display (e.g., KX-NT136)
To start programming
Supply power to the IP-PT.
To set the IP address of the IP-PT
Select "Network".
To enter the IP address of the IP-EXT card (PBX IP Address)
Return to the
Menu screen.
To set VLAN parameters
To the VLAN settings
OR
To end programming
STORE
Press "STORE".
* Valid IP address range: "1.0.0.0" to "223.255.255.255"
34 Information about IP Proprietary Telephones
SETUP
Press "SETUP"
when it is displayed.
ENTER Select "Enable" for
DHCP setting.
Select "PBX". ENTER
The IP-PT will reboot
and establish connection
to the network.
PBX IP Address*
ENTER