Panasonic KX-TDA50 Feature Manual page 77

DISA Intercept Routing—No Dial
If the caller fails to dial any digits within a preprogrammed time period (DISA 1st Dial Time for Intercept)
following the outgoing message (OGM), the call is redirected to the operator extension.
→ 2.8.4 [2-3] Timers & Counters—DISA / Door / Reminder / U. Conf—DISA—No Dial Intercept Timer
→ [211] DISA Intercept Time
DISA Built-in Automated Attendant Number (DISA AA Service)
After listening to the outgoing message (OGM), the caller may dial a single digit (DISA AA number). The
destination for each DISA AA number can be assigned for each message. It is also possible to assign other
DISA floating extension numbers as the destination (Multistep DISA AA Service).
If the caller dials a second digit within a preprogrammed time period (DISA 2nd Dial Time for AA), the DISA
AA service is not employed.
→ 2.11.4 [5-3-2] Voice Message—DISA Message—1 Digit AA Destination (Extension Number)—Dial 0–9
→ 2.8.4 [2-3] Timers & Counters—DISA / Door / Reminder / U. Conf—DISA—2nd Dial Timer for AA
Outgoing Message (OGM)
When a call arrives on a DISA line, a prerecorded DISA message will greet and guide the caller.
Any extension assigned as the manager can record outgoing messages (OGMs). (→ 1.12.2 OGM
(Outgoing Message))
[Programming Example]
Outgoing
Floating Extn.
Message
(OGM) No.
01
02
:
: → 2.11.4 [5-3-2] Voice Message—DISA Message—Floating Extension Number
*1
→ [730] Outgoing Message (OGM) Floating Extension Number
: → 2.11.4 [5-3-2] Voice Message—DISA Message—1 Digit AA Destination (Extension Number)—Dial
*2
0–9
: → 2.11.4 [5-3-2] Voice Message—DISA Message—Busy / DND Message No.
*3
DISA Security Mode and Available Features
If the DISA AA service is not employed, the caller may access the PBX features by entering the feature
numbers. To prevent others from accessing the PBX features, it is possible to assign DISA security.
→ 2.11.3 [5-3-1] Voice Message—DISA System—DISA Security—DISA Security Mode
→ [732] DISA Security Mode
The features available depend on the preprogrammed DISA security mode as follows:
Automated Attendant No.
No. *1
0 1 2
501 100 301 200 103 202 101 102 400 104 205
502
: : :
3 4 5 6
: : : : :
*2
Busy/DND
Message No.
7 8 9
04
05
: : : :
Feature Manual
1.4 D
*3
77