Putting Into Operation; Dry Suction; Wet Suction - Kärcher 2000 E Manual

5.951-556

4. Putting into operation

Prepare your suction unit for operation as
follows.
• Push the suction hose into the connection
until it latches into position.
• Join the two suction pipes and connect to the
suction hose.
• Connect the required nozzle to the suction
pipe. (see "Nozzle selection").
• Insert the mains plug into the socket.
• Switch on the suction unit.
5. Use
The following explains the best way to use
your suction unit.
The flat folding filter must always
Note:
remain fitted in the suction unit.

Dry suction

You can suck up dry dirt without any problem
both with and without a paper filter bag.
We recommend that you always use the paper
filter bag for sucking up fine dirt.
The paper filter bag gives you:
- significantly higher dust holding capacity.
- simple and hygienic dust disposal.

Wet suction

• Always work without a paper filter bag.
• Empty the dirt container to prevent sludge for-
mation.
• The suction unit switches off automatically
when the dirt container is full.
Note: After emptying, press the On/Off
switch twice.
Never suck up explosive liquids (e.g. petrol,
diesel fuel, heating oil), acids or solvents!
11