Canon iPF8400S User Manual page 598

Menu Settings
System
Keep Paper Size
Setup
Rep.P.head Print
Nozzle Check
CarriageScanWdth
Use RemoteUI
Reset PaprSetngs
Erase
HDD Da-
ta
598
Output
Method
Setting Item
High Speed
Secure High Spd.
Secure
Print
Print (Auto Del)
Save: Box XX
Description, Instructions
Choose On to use the paper size setting as the basis for
printing instead of other settings. The margin setting of the
printer menu will be used instead of the margin setting of the
printer driver if the latter is smaller, which may prevent text or
images in the margin from being printed.
Choose Off to give priority to margin settings. The larger val-
ue is used if the margin specified in the printer driver does
not match the margin in the printer menu.
Choose On to have the printer automatically execute the Ad-
vanced Adj. operations after you replace the Printhead.
(See "Automatic Adjustment to Straighten Lines and Col-
ors.")
P.712
➔
In Frequency, specify the timing for automatic checks of
nozzle clogging. Choose Standard to have the printer adjust
the timing for checks based on the frequency of nozzle use.
Choose 1 page to check once per page. Choose 10 pages
to check once per 10 pages. Choose Off to not execute
check.
If On is selected in Warning, a warning may be displayed on
the Control Panel depending on the result of the nozzle
check.
Specify the scan width of the carriage during printing. Select
Automatic for movement equivalent to the width of paper
loaded. Selecting Fixed will reduce any soiling on the back of
the paper, although printing may take a little longer.
Choosing Off prohibits access from RemoteUI. Settings can
only be configured from the control panel.
Restores settings that you have changed with Media Config-
uration Tool to the default values.
Erases file management data for print job data stored on the
printer's hard disk. (See "Erasing Data on the Printer's Hard
Disk.")
P.618
➔
Overwrites the entire hard disk with random data. (See
"Erasing Data on the Printer's Hard Disk.")
Overwrites the entire hard disk with 00, FF, and random data
(one time each). Verification is performed to check if the data
was correctly written. (See "Erasing Data on the Printer's
Hard Disk.")
P.618
➔
Select the printing method for jobs received from software
other than the printer driver. When using the printer driver,
configure settings on the printer.
To print as usual, select Print. Selecting Print (Auto Del) will
print the job and then delete the data from the printer's hard
disk. Selecting Save: Box 01 will only save the print job in
the box, without printing it.
iPF8400S
P.618
➔
User's Guide