Status Print - Canon iPF8400S User Manual

Status Print

*1: A rough estimate of how much ink was consumed per job is displayed. Actual ink consumption may be different. The average
margin of error for estimates calculated according to Canon measurement conditions for ink costs is ±15%. Canon does not guar-
antee the accuracy of these estimates. Estimates may vary depending on conditions of use. Calculation of these estimates does
not include ink consumed when cleaning printheads by forceful ejection of ink.
*2: Displayed as the menu during printing while printing is in progress.
*3: Not displayed in the regular menu.
Status Print
Status Print
You can print a Status Print report indicating the current status of the printer.
With Status Print, information is printed regarding the printer firmware version, various settings, and the status of
consumables.
Printing Status Print reports
1
Load paper.
When using sheets, load paper of A4/Letter size. You will need at least four sheets.
The required sheet quantity varies depending on the execution log quantity of unique calibration.
2
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to
select Settings/Adj. tab (
Note
3
Press the OK button.
The Set./Adj. Menu is displayed.
4
Press ▲ or ▼ to select Test Print, and then press the OK button.
5
Press ▲ or ▼ to select Status Print, and then press the OK button.
Checking the information in Status Print reports
The following information is included in Status Print reports.
Canon imagePROGRAF iPFxxxx Status Print
Firm
Boot
MIT(DBF)
MIT(DB)
S/N
Date
600
Paper Menu
Paper Type
ManageRemainRoll
Keep Paper Type
).
If the Tab Selection screen is not displayed, press the Menu button.
•
Roll Media
Cut Sheet
Printer model
Firmware version
Boot ROM version
MIT database format version
MIT database version
Printer serial number
Indicates when the status print report was printed.
Information on the loaded paper.
iPF8400S
User's Guide