Canon iPF8400S User Manual page 590

Menu Structure
First Level
Take-up
Reel( *12 )
Prep.Move-
Printer
Admin.
Menu( *9 )
Adj. Fine Feed( *15 )( *16 )
Printer In-
fo( *15 )
*1: Available after you have used Standard or Initial adjustmt in Head Posi. Adj. once.
*2: Available if Adj. Priority is Automatic or Print Quality.
*3: Available if Adj. Priority is Automatic or Print Length.
*4: Not displayed if IPv4 Mode is Manual.
*5: Not displayed if NetWare is Off.
*6: Not displayed if Auto Detect is On.
*7: Follows the setting in Date Format.
*8: Viewing and configuration is possible for administrators, and only viewing for other users.
*9: Viewing and configuration is possible for administrators only.
*10: Not displayed if IPv6 Support is Off.
*11: Default setting for the time to enter the power save mode/Sleep mode is recommended.
*12: Displayed only when the Media Take-up Unit is attached.
*13: Available if: (a) Use Take-up Reel is Enable, (b) roll paper is loaded, and (c) you have not executed Auto Feed for the loaded roll.
*14: Available when Use Take-up Reel is Enable.
*15: Displayed as the menu during printing while printing is in progress.
*16: Not displayed in the regular menu.
590
Second Level Third Level
Print After Off* | On
Recv
Common Box Print* | Print (Auto Del)
Set.( *4 )( *8 )
Show Job Off | On*
Log( *8 )
Use Take-up Disable* | Enable
Reel
Auto Feed( *13 )
Skip Take-Up Off* | On
Err( *14 )
Level 1 | Level 2 | Level 3
Change Pass- (The screen for setting the password is displayed)
word( *9 )
Init.Admin.Pswd( *9 )
Paper Info
Ink Info
Head Info ProductName:
s/n:
Days elapsed:
Count [Mdot]:
Printhead L
Printhead R
System Info
Error Log
Other Counter
Fourth Level Fifth Level
ProductName: | s/n: | Days elapsed: | Count [Mdot]:
ProductName: | s/n: | Days elapsed: | Count [Mdot]:
iPF8400S
Sixth Level Seventh Level
User's Guide