Canon iPF8400S User Manual page 394

Output Settings Panel
The following settings are available for enlarged/reduced printing.
Fit Paper Size
Fit Roll Paper Width
Scaling
• Borderless Printing
You can print the media without margins on all sides when the roll paper with the specific width and the specif-
ic media type is used.
• Available only if rolls are selected in Paper Source.
Note
• Paper Size
You can select the size of the print media.
• This is not displayed when Fit Roll Paper Width is set in Enlarged/Reduced Printing.
Note
• Print Centered
Select this feature to print the image in the center of a cut sheet or to print left and right margins evenly from
the edges of roll paper.
This feature is useful when you print the document enlarged or reduced with Scaling as well. When an image is
•
scaled, it is always enlarged or reduced in reference to a starting point in the upper left corner of the page. If the
Note
image is reduced, the bottom and right margins are enlarged and the top and left margins remain unchanged. At
that point, you can set all margins evenly with this feature.
• No Spaces at Top or Bottom
You can set the printer to print without any empty area when the print data contains empty area at the top or
bottom. Since the printer does not feed paper over the empty area, you can save paper.
Available only if rolls are selected in Paper Source.
•
Note
• Rotate Page
Select the method for rotating page.
The following settings are available for rotating page.
Rotate Right 90 Degrees
394
Rotate Left 90 Degrees
Setting
Enlarges/reduces the whole page automatically to fit the media size selected for output. Select
the media size to print from Paper Size.
Enlarges/reduces the whole page automatically to fit the width of the roll paper with the page
width.
*Make sure that the width of the roll paper in the printer is set correctly for Roll Paper Width in
the Paper Settings panel.
*Displayed only if rolls are selected in Paper Source.
Enlarges/reduces the whole page by the scaling rate as specified. Input the scaling value in
numerical characters. You can specify a range between 5 and 600%.
*You can change the numbers by clicking either ▲ button or ▼ button.
*Although Scaling can be set to make the image larger than the media size, the part that does
not fit in the media cannot be printed.
*This is not displayed when a checkmark is placed in Borderless Printing.
Setting
Rotates the portrait page right 90 degrees and print in landscape orientation. When the rotated
page can fit in the width of roll paper, the page is rotated automatically, and when it can not fit
in the width of roll paper, the page is not rotated.
*When Fit Roll Paper Width is selected under Enlarged/Reduced Printing, then the image is
enlarged or reduced after rotating to fit the width of the roll paper.
Rotates the portrait page left 90 degrees and print in landscape orientation. When the rotated
page can fit in the width of roll paper, the page is rotated automatically, and when it can not fit
in the width of roll paper, the page is not rotated.
Details
Details
iPF8400S
User's Guide