Cutting Roll Paper After Printing (Mac Os) - Canon iPF8400S User Manual

Hide thumbs Also See for iPF8400S:

Table of Contents

Click OK to close the Roll Paper Options dialog box.

Confirm the print settings and print as desired.

For tips on confirming print settings, see "Confirming Print Settings ."

Roll paper will be automatically cut after printing.

Cutting Roll Paper After Printing (Mac OS)

This topic describes how to cut roll paper automatically after printing (using the auto cut function), as well as how to

print a cut line for manual cutting.

The auto cut function is activated on the printer by default and when the printer driver is installed. Follow the steps below

to reactivate the function if it is disabled, or to select the setting for printing a cut line instead.

This sets the

Format for and

The configuration method varies depending on the OS

and application software you are using.

If Page Setup is displayed in the application menu, the

settings are configured by opening the Page Attrib-

utes dialog box from Page Setup.

If it is not displayed, the settings are configured in the up-

per part of the printer driver displayed when you select

Print from the application software menu.

Select the printer in the

Choose the original size in the

If you configured the settings using the Page Attributes dialog box, click

then select Print from the application software menu.

User's Guide

Printer list.

Paper Size list.

Cutting Roll Paper After Printing (Mac OS)

OK to close the dialog box, and

Show Quick Links

Table of Contents