iPF8400S
Handling rolls
Handling rolls
Loading Rolls in the Printer ........................................................................................................................................ 471
Changing the Type of Paper ..................................................................................................................................... 475
Specifying the Paper Length ..................................................................................................................................... 477
Clearing Jammed Roll Paper .............................................................................................................................. 853
➔
Feeding Roll Paper Manually ..................................................................................................................................... 481
Roll Holder Set ................................................................................................................................................................. 620
Attaching the Roll Holder to Rolls
Attaching the Roll Holder to Rolls
When printing on rolls, attach the Roll Holder to the roll.
Rolls have a two- or three-inch paper core. Use the correct attachment for the paper core. The printer comes
equipped with the 2-Inch Paper Core Attachment installed.
Using Rolls with a 2-inch Paper Core
Roll Holder Side
Holder Stopper Side
No Attachment Needed
2-Inch Paper Core Attachment
•
Set the roll on a table or other flat surface so that it does not roll or fall. Rolls are heavy, and dropping a roll may cause
injury.
Caution
•
When handling the roll, be careful not to soil the printing surface. This may affect the printing quality. We recommend
wearing clean cloth gloves when handling rolls to protect the printing surface.
Important
•
Use scissors or a cutting tool to cut the edge of the roll paper if it is uneven, dirty, or has tape residue. Otherwise, it may
cause feeding problems and affect the printing quality. Be careful not to cut through any barcodes printed on the roll.
•
Align the edges of the paper on both ends of the roll. Misalignment may cause feeding problems.
User's Guide
Using Rolls with a 3-inch Paper Core
Roll Holder Side
3-Inch Paper Core Attachment #1
Attaching the Roll Holder to Rolls
Holder Stopper Side
3-Inch Paper Core Attachment #2
469