Canon iPF8400S User Manual page 596

Menu Settings
Mainte-
Replace P.head
nance
Repl. maint cart
Head In-
fo
Repl. S. Cleaner
Change Cutter
Interface EOP Timer
Setup
TCP/IP
596
NetWare
Setting Item
Printhead L
Printhead R
IPv4 IPv4 Mode
Protocol DHCP
BOOTP
RARP
IPv4 IP Address
Settings
Subnet Mask
Default G/W
DNS DNS Dync update
Settings
Pri. DNS SrvAddr
Sec. DNS SrvAddr
DNS Host Name
DNS Domain Name
IPv6 IPv6 Support
IPv6 StlessAddrs
DHCPv6
DNS DNS
Settings Dync
update
Pri. DNS SrvAddr
Sec. DNS SrvAddr
DNS Host Name
DNS Domain Name
NetWare
Description, Instructions
Execute when replacing the Printhead. Follow the instruc-
tions displayed to complete the required procedure. (See
"Replacing the Printhead.")
Not displayed during a warning message that the remaining
Maintenance Cartridge capacity is low.
Execute when replacing the Maintenance Cartridge. Follow
the instructions displayed to complete the required proce-
dure. (See "Replacing the Maintenance Car-
tridge.")
P.831
➔
Indicates information about the printhead.
Replace the Shaft Cleaner. Follow the instructions displayed
to complete the required procedure. (See "Replacing the
Maintenance Cartridge.")
Replace the Cutter Unit. Follow the instructions displayed to
complete the required procedure. (See "Replacing the Cutter
Unit.")
P.827
➔
Once you replace the Cutter Unit, you can also reset the cut
counter.
Specify the timeout period before cancellation of print jobs
that cannot be received by the printer.
Choose whether the printer IP address is configured auto-
matically or a static IP address is entered manually.
Specify the protocol used to configure the IP address auto-
matically.
Specify the printer network information when using a static IP
address.
Enter the IP address assigned to the printer, as well as the
network subnet mask and default gateway.
The value that was automatically configured is displayed if
you have set IPv4 Mode to Automatic.
Specify whether DNS server registration is updated automati-
cally.
Specify the DNS server address.
Specify the DNS host name.
Specify the DNS domain name.
Specify whether to connect via IPv6.
Specify whether a IPv6 stateless address is used.
Specify whether DHCPv6 settings are used.
Statefull Specify whether DNS server registration is updated automati-
Addr cally.
State-
less
Addr
Specify the DNS server address.
Specify the DNS host name.
Specify the DNS domain name.
Specify the NetWare protocol. To apply your changes,
choose Register Setting.
iPF8400S
P.819
➔
P.831
➔
User's Guide