Color Settings Panel - Canon iPF8400S User Manual

iPF8400S
Setting
Rotate Left 90 Degrees
Rotate 180 degrees
• Available only if rolls are selected in Paper Source.
Note
• Output Method Button
Click the button to open the Output Method dialog box.
In this dialog box, you can specify the object output method.

Color Settings Panel

Color Settings Panel

• Color Mode
You can select a color mode to suit the print job.
Setting
Color
Monochrome (Photo)
Monochrome
• The availability of settings depends on the print priority and media type selections.
Note
• Matching Mode
Under Matching Mode, select the matching mode.
Setting
Driver Matching Mode
➔
ICC Matching Mode
P.396
➔
No Correction
User's Guide
*When Fit Roll Paper Width is selected under Enlarged/Reduced Printing, then the image is
enlarged or reduced after rotating to fit the width of the roll paper.
Allows you to rotate the image 180 degrees from the vertical to the right.
Enables color printing.
Prints monochrome photo image data in a gray scale that is free of color casting (phenomenon
of grays that appear tinted).
Disables color printing and converts image from continuous color to grayscaled monochrome.
Enables printing of optimal color tones using a driver specific color profile. You should normally
P.396
select this mode.
Enables color matching using ICC profiles. Select this if you want to print by specifying the
input profile, printer profile, and matching method in detail. This allows you to use ICC profiles
for digital cameras and scanners, ICC profiles created using the profile creation tool, etc.
No color matching is performed. Select this option when you want to perform color matching in
the software application.
Details
Details
Details
Color Settings Panel
395