Canon iPF8400S User Manual page 243

iPF8400S
• Specify the Range of Images button
When this button is clicked, the Specify the Range of Images dialog box is displayed for specifying the range
of images.
When you specify the range by using the mouse or other means and then click the OK button, the Specify the
Range of Images dialog box closes and the specified image range is redisplayed as the adjustment pattern.
If you click the Cancel button, the Specify the Range of Images dialog box closes even if a range is selected.
• The selected range is cleared by clicking the image with a range selected.
Note
• Restore to Previous button
When this button is clicked, the settings are restored to the defaults when the Adjustment pattern setting
dialog box was first displayed.
• Close button
When this button is clicked, the setting values in the Adjustment pattern setting dialog box are saved and
the dialog box is closed. These setting values are applied the next time the Print Plug-In for Photoshop/Digital
Photo Professional is started. Furthermore, if you select the Update Base Values in the Color Settings
Sheet check box and click the Close button, the setting values for the image enclosed in the blue frame in the
preview area (central image) are applied to the settings in the Color Settings sheet (color or monochrome).
• Print Adjustment Pattern button
When this button is clicked, printing the adjustment pattern is executed. The Adjustment pattern setting dia-
log box does not close even after executing the printing.
The adjustment values are printed at the top of each image. If both the Horizontal Axis and Vertical Axis are
configured, the adjustment value for the Horizontal Axis is displayed on the right and the adjustment value for
the Vertical Axis is displayed on the left.
Each of the setting values for the paper type, print mode, and output profile as well as the adjustment values
configured in the Color Settings sheet (color or monochrome) are printed at the bottom of the paper. Howev-
er, the adjustment values for the Curves are not printed.
• The job name when printing the adjustment pattern is "Original Image Name + Pattern-Print". For example, the print
job name for the image "ABC.jpg" is "ABC_Pattern-Print.jpg".
Note
User's Guide
Adjustment pattern setting dialog box
243