Mitsubishi Electric FR-E700 Instruction Manual page 151

Monitor display and monitor output signal
(3) Operation panel I/O terminal monitor (Pr. 52)
When Pr. 52 is set to any of "55 to 57", the I/O terminal status can be monitored on the operation panel.
The I/O terminal monitor is displayed on the third monitor.
The LED is ON when the terminal is ON, and the LED is OFF when the terminal is OFF. The center line of LED is always ON.
Pr. 52 Setting
55 Displays the I/O and output terminal ON/OFF status of the inverter unit.
56 ∗
Displays the input terminal ON/OFF status of the digital input option (FR-A7AX E kit).
Displays the output terminal ON/OFF status of the digital output option (FR-A7AY E kit) or relay output option (FR-A7AR
57 ∗
E kit).
* You can set "56" or "57" if the option is not fitted. When the option is not fitted, the monitor displays are all OFF.
On the unit I/O terminal monitor (Pr. 52 = "55"), the upper LEDs denote the input terminal status and the lower the output
terminal status.
RM
RH
Free
RL
RUN
Free
ABC
Free Free
On the input option terminal monitor (Pr. 52 = "56"), the decimal point LED of the first digit LED is ON.
X1
X2
X3
X0
X12
X10 X13
X11 X14
On the output option terminal monitor (Pr. 52 = "57"), the decimal point LED of the second digit LED is ON.
Y1
Y2
Y0 Y3
RA3
RA1
RA2
148
Free
RES Free
Free STF
MRS STR
Free Free Free
FU Free
Free
X4 X7
X5 X8
X6 X9
X15 Free
Free
DY
Free Free
Y4
Y5
Y6
Decimal point LED of second digit LED is always ON
Monitor Description
Free
Input terminal
Center line is always ON
Free
Output terminal
Free Free
Center line is always ON
Free
Decimal point LED of first digit
LED is always ON
FR-A7AY E kit
Center line is always ON
FR-A7AR E kit
- Display example -
When signals STF, RH and
RUN are ON
Hz
A
V