C.2.6.4 Job Mode, Deleting An Image - Image Access WideTEK 36C Operation Manual

C.2.6.4 Job Mode, deleting an image
Use the upwards / downwards buttons to move the blue frame to the
image which should be deleted.
Touch the button to select the image. The image is marked with a red
frame; the button itself and the up-/downwards buttons are marked with a
red dotted frame.
Touch the button. The image will be deleted. The images, which follows
in the list, will be moved upwards.
C.2.6.5 Quit Job Mode
Touch this button in order to exit the Job Mode and to return to single
mode scanning.
On the touchscreen a window opens.
Picture 52: Exit Job Mode request
Touch Yes to confirm the end of the Job Mode.
Otherwise touch No to continue the scanning in Job Mode.
C.2.7 Return to Select Application Screen
Touch the button to leave the ScanWizard application. This will return the
touchscreen to the Select Application screen (Picture 11).
Chapter C.3 to chapter C.7 and the corresponding subchapters describe the available
functions of the Scan2Net application.
To leave the application, touch a free section in the title line of the application. Confirm the
request by touching the STOP button.
Page 62 Manual