User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
The range of preference is 0 to 255.
Default
Format
Mode
no distance ospf
This command sets the default route preference value of OSPF in the router. The type of OSPF can
be intra, inter, type-1, or type-2. Format
Format
Mode
distance rip
This command sets the route preference value of RIP in the router. Lower route preference values
are preferred when determining the best route.
Default
Format
Mode
no distance rip
This command sets the default route preference value of RIP in the router.
Format
Mode
distribute-list out
This command is used to specify the access list to filter routes received from the source protocol.
Format
Mode
Routing Commands
Intra -- 8; Inter -- 10; Type-1 -- 13; Type-2 -- 150.
distance ospf {intra | inter | type1 | type2} <0-255>
Router OSPF Config
no distance ospf {intra | inter | type1 | type2}
Router OSPF Config
15
distance rip <0-255>
Router RIP Config
no distance rip
Router RIP Config
distribute-list <1-199> out {rip | bgp | static | con-
nected}
Router OSPF Config
202-10009-01_060204
9-17