Ip Vrrp; No Ip Vrrp; Ip Vrrp Mode; No Ip Vrrp Mode - NETGEAR 7300 Series User Manual

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Mode

ip vrrp

This command enables the administrative mode of VRRP in the router.
Default
Format
Mode

no ip vrrp

This command disables the default administrative mode of VRRP in the router.
Format
Mode

ip vrrp mode

This command enables the virtual router configured on the specified interface. Enabling the status
field starts a virtual router. The parameter <vrID> is the virtual router ID which has an integer
value ranging from 1 to 255.
Default
Format
Mode

no ip vrrp mode

This command disables the virtual router configured on the specified interface. Disabling the
status field stops a virtual router.
Format
Mode
9-58
Interface Config
Enabled
ip vrrp
Global Config
no ip vrrp
Global Config
Disabled
ip vrrp <vrID> mode
Interface Config
no ip vrrp <vrID> mode
Interface Config
202-10009-01_060204
Routing Commands