Vlan Port Pvid All; No Vlan Port Pvid All; Vlan Port Tagging All; No Vlan Port Tagging All - NETGEAR 7300 Series User Manual

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software

vlan port pvid all

This command changes the VLAN ID for all interface.
Default
Format
Mode

no vlan port pvid all

This command sets the VLAN ID for all interfaces to 1.
Format
Mode

vlan port tagging all

This command configures the tagging behavior for all interfaces in a VLAN to enabled. If tagging
is enabled, traffic is transmitted as tagged frames. If tagging is disabled, traffic is transmitted as
untagged frames. The ID is a valid VLAN identification number.
Format
Mode

no vlan port tagging all

This command configures the tagging behavior for all interfaces in a VLAN to disabled. If tagging
is disabled, traffic is transmitted as untagged frames. The ID is a valid VLAN identification
number.
Format
Mode

vlan protocol group

This command adds protocol-based VLAN group to the system. The <
characters. When it is created, the protocol group will be assigned a unique number that will be used to identify the
group in subsequent commands.
Format
Switching Commands
1
vlan port pvid all <1-4094>
Global Config
no vlan port pvid all <1-4094>
Global Config
vlan port tagging all <1-4094>
Global Config
no vlan port tagging all <1-4094>
Global Config
vlan protocol group <groupname>
202-10009-01_060204
is a character string of 1 to 16
groupName>
8-75