NETGEAR 7300 Series User Manual page 326

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Table 13-2. IS CLI Mapping (continued)
Package 7300 Series L3 Switch Command
Switching config vlan port tagging <enable |
disable> <1-4094> <slot/port | all>
Switching config vlan port pvid <1-4094>
<slot/port | all>
Switching config vlan port acceptframe <all |
vlan> <slot/port | all>
Switching config vlan port ingressfilter
<enable | disbale> <slot/port | all>
A-38
CLI Command
Mode
Global
Config
Interface
Config
Interface
Config
Global
Config
Global
Config
Interface
Config
Global
Config
Interface
Config
Interface
Config
Global
Config
Global
Config
Interface
Config
Interface
Config
Global
Config
Global
Config
202-10009-01_060204
Syntax
vlan participation all {exclude |
include | auto} <1-4094>
vlan tagging <1-4094>
no vlan tagging <1-4094>
vlan port tagging all <1-4094>
no vlan port tagging all <1-4094>
vlan pvid <1-4094>
vlan port pvid all <1-4094>
vlan acceptframe {vlanonly | all}
no vlan acceptframe
vlan port acceptframe all {vlanonly |
all}
no vlan port acceptframe all
vlan ingressfilter
no vlan ingressfilter
vlan port ingressfilter all
no vlan port ingressfilter all
IS CLI Mapping