User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
•
Device Management
•
Interface Operations
•
Product Overview
•
Summary of Features
How to Log In to the Managed Switch
The NETGEAR 7300 Series Layer 3 Managed Switch can be configured remotely from Microsoft
Internet Explorer browser version 5.0 or above, or Netscape Navigator web browser version 4.78
or above.
Determine the IP address of your managed switch.
1.
Open a Web browser such as Internet Explorer or Netscape Navigator.
2.
Log in to the managed switch using whatever IP address the unit is currently configured with.
3.
Use the default user name of admin and default of no password, or whatever LAN address and
password you have set up.
.
Figure 4-2: 7300 IP address in browser address bar
A login window opens:
Figure 4-3: Login splash screen for the Managed Switch
4-2
Introduction of the basic icons and management of the device
Describes Web browser requirements, and common commands
Describes supported SNMP and Web management features
Feature List
202-10009-01_060204
Web-Based Management Interface