Table of Contents
Advertisement
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
show ip stats
This command displays IP statistical information. Refer to RFC 1213 for more information about
the fields that are displayed. This command takes no options.
Format
Mode
show ip vlan
This command displays the VLAN routing information for all VLANs with routing enabled in the
system.
Format
Mode
MAC Address used by Routing VLANs Is the MAC Address associated with the
internal bridge-router interface (IBRI). The same MAC Address is used by all VLAN routing
interfaces. It will be displayed above the per-VLAN information.
VLAN ID
Logical Interface
IP Address
Subnet Mask
show router rip interface
This command displays information related to a particular RIP interface.
Format
Mode
Interface
IP Address
Send version
9-52
show ip stats
Privileged EXEC and User EXEC
show ip vlan
Privileged EXEC and User EXEC
Is the identifier of the VLAN.
Indicates the logical slot and port associated with the VLAN rout-
ing interface.
Displays the IP Address associated with this VLAN.
Indicates the subnet mask that is associated with this VLAN.
show ip rip interface <slot/port>
Privileged EXEC and User EXEC
Is the unit slot/port identifying each interface. This is a config-
ured value.
The IP source address used by the specified RIP interface. This is
a configured value.
The RIP version(s) used when sending updates on the specified
interface. The types are none, RIP-1, RIP-1c, RIP-2. This is a
configured value.
202-10009-01_060204
Routing Commands
Advertisement
Table of Contents
