Table of Contents
Advertisement
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
show bootpdhcprelay
This command displays the BootP/DHCP Relay information.
Format
Mode
Maximum Hop Count
Minimum Wait Time (Seconds) Is the minimum wait time.
Admin Mode
Server IP Address
Circuit Id Option Mode Is the DHCP circuit Id option which may be enabled or disabled.
Requests Received
Requests Relayed
Packets Discarded
show ip brief
This command displays all the summary information of the IP. This command takes no options.
Format
Mode
Default Time to Live
Router ID
Routing Mode
IP Forwarding Mode
show ip interface
This command displays all pertinent information about the IP interface.
Format
Mode
Routing Commands
show bootpdhcprelay
Privileged EXEC and User EXEC
Is the maximum allowable relay agent hops.
Represents whether relaying of requests is enabled or disabled.
Is the IP Address for the BootP/DHCP Relay server.
Is the number or requests received.
Is the number of requests relayed.
Is the number of packets discarded.
show ip brief
Privileged EXEC and User EXEC
The computed TTL (Time to Live) of forwarding a packet from
the local router to the final destination.
Is a 32 bit integer in dotted decimal format identifying the router,
about which information is displayed. This is a configured value.
Shows whether the routing mode is enabled or disabled.
Shows whether forwarding of IP frames is enabled or disabled.
This is a configured value.
show ip interface <slot/port>
Privileged EXEC and User EXEC
202-10009-01_060204
9-37
Advertisement
Table of Contents
