Table of Contents
Advertisement
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Show Commands
show ip access-lists
This command displays an Access Control List (ACL) and all of the rules that are defined for the
ACL. The <
accesslistnumber>
Format
Mode
Rule Number
Action
Protocol
Source IP Address
Source IP Mask
Source Ports
Destination IP Address This displays the destination IP address for this rule.
Destination IP Mask
Destination Ports
Service Type Field Match This field indicates whether an IP DSCP, IP Precedence, or IP
Service Type Field Value This field indicates the value specified for the Service Type
CLI Commands: ACL
is the number used to identify the ACL.
show ip access-lists <accesslistnumber>
Privileged EXEC and User EXEC
This displays the number identifier for each rule that is defined
for the ACL.
This displays the action associated with each rule. The possible
values are Permit or Deny.
This displays the protocol to filter for this rule.
This displays the source IP address for this rule.
This field displays the source IP Mask for this rule.
This field displays the source port range for this rule.
This field displays the destination IP Mask for this rule.
This field displays the destination port range for this rule.
TOS match condition is specified for this rule.
Field Match (IP DSCP, IP Precedence, or IP TOS).
202-10009-01_060204
Chapter 11
CLI Commands: ACL
11-1
Advertisement
Table of Contents
