NETGEAR 7300 Series User Manual page 324

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Table 13-2. IS CLI Mapping (continued)
Package 7300 Series L3 Switch Command
Switching config port physicalmode <slot/port
| all> <100h | 100f | 10h | 10f>
Switching config port lacpmode <slot/port/all>
<enable/disable>
Switching config port autoneg <slot/port/all>
<enable/disable>
Switching config lag create <name>
Switching config lag addport <logical slot/
port> <slot/port>
A-36
CLI Command
Mode
Interface
Config
Global
Config
Global
Config
Interface
Config
Global
Config
Interface
Config
Interface
Config
Global
Config
Global
Config
Interface
Config
Interface
Config
Global
Config
Global
Config
Global
Config
Interface
Config
202-10009-01_060204
Syntax
no snmp trap link- status
snmp trap link- status all
no snmp trap link- status all
speed {{100 | 10} {half-duplex |
full-duplex} | 1000 full-duplex}
speed all {{100 | 10} {half-duplex |
full-duplex} | 1000 full-duplex}
port lacpmode
no port lacpmode
port lacpmode all
no port lacpmode all
auto-negotiate
no auto-negotiate
auto-negotiate all
no auto-negotiate all
port-channel <name>
addport <logical slot/port>
IS CLI Mapping