Appendix Ais Cli Mapping - NETGEAR 7300 Series User Manual

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
This chapter illustrates the mapping between CLI commands and the previous 7300 Series L3
Switch commands. The Package column indicates the 7300 Series L3 Switch package in which the
command is located.
Table 13-2. IS CLI Mapping
Package 7300 Series L3 Switch Command
QOS show acl detailed <aclid>
QOS show acl summary
QOS config acl create <aclid>
QOS config acl delete <aclid>
QOS config acl rule create <aclid>
<rulenum>
QOS config acl rule delete <aclid>
<rulenum>
IS CLI Mapping
CLI Command
Mode
Privileged
EXEC
Privileged
EXEC and
User
EXEC
Global
Config
Global
Config
202-10009-01_060204
Appendix A
IS CLI Mapping
Syntax
show ip access-lists [<1-199>]
access-list {(<1-99> {deny | permit}
<srcip> <srcmask>) | ( {<100-199>
{deny | permit} {every | {{icmp | igmp |
ip | tcp | udp | <number>} <srcip>
<srcmask> [{eq {<0-65535> |
<portkey>} | range <startport>
<endport>}] <dstip> <dstmask> [{eq
{<0-65535> | <portkey>} | range
<startport> <endport>}] {[precedence
<precedence>] | [tos <tos>
<tosmask>] | [dscp <dscp>]}}}})}
no access-list {<1-99> | <100-199>}
A-1