Print Density - Riso HC5000T Instruction Manual

fm.book 43 ページ ２００４年７月１３日 火曜日 午後４時５５分

4.7 Print Density

You can manually change the print density.
The density of overall printing is set. To adjust specific colours or to change the halftone reproduction method, use the "Image
processing" tab of the printer driver to adjust or process the image using the application software.
Settings
Density-Level 5 Dark
Density-Level 4 Medium dark
Density-Level 3 Standard
Density-Level 2 Medium light
Density-Level 1 Light
Although Print Density can also be set on the "Options" tab of the printer driver, you can temporarily stop printing with the PRINT/
PAUSE Key and change or reset this function on the printer.
1
Press the MENU Key.
2
Press the or
"Configuration."
3
Press the OK Key.
4
Press the or
"Print Density."
5
Press the OK Key.
The submenu of Print Density is displayed.
6
Press the or
desired density.
key to display
key to display
key to select the
7
Press the OK Key.
When the screen in step 4 reappears, you can continue
setting.
To exit the setting, press the PRINT/PAUSE key.
2
43