Table of Contents
Advertisement
fm.book 25 ページ ２００４年７月１３日 火曜日 午後４時５５分
How to Use the Operation Panel
You can set or change the printer environment such as print position and paper type registration using the MENU Key of the Oper-
ation Panel.
Items That Can Be Set from the Menu
The item that can be set from the menu and the details of each setting are shown below.
AAA indicates the factory default setting.
Item
Menu 1 Print Position Adjust
Adjusts the print position.
Menu 2 Test Print
Prints one sheet for checking the details of setting.
Menu 3 Temp Data Retrieve
Retrieves temporary data and prints additionally.
Menu 4 Configuration
Sets the paper to be set in the feed trays, the print den-
sity, and the Paper Receiving Tray.
4.1 Standard Feed Tray
Sets the paper to be loaded in the Standard Feed
Tray.
4.1.1 Paper Size
4.1.2 Paper Type
4.1.3. Double Feed Check
4.2 Feed Tray 1
Sets the paper to be loaded in Feed Tray 1.
4.2.1. Paper Size
4.2.2 Paper Type
4.2.3 Double Feed Check
4.3 Feed Tray 2
Sets the paper to be loaded in Feed Tray 2.
4.3.1 Paper Size
4.3.2 Paper Type
4.3.3 Double Feed Check
Details of setting (range)
Horizontal and vertical
13
-20.0mm to +20.0mm (-
/
" to +
16
−
0000
1 to 9999
Auto
A3/A4/B4/B5/A4-R/B5-R/Foolscap/Ledger/Legal/Let-
ter/Letter-R/Statement/000 × 000 mm
Standard Paper 1/High-Quality 1/High-Quality 2/
Paper Type 1 - 5
ON
OFF
Auto
A3/A4/B4/B5/A4-R/B5-R/Foolscap(Ledger/Legal/Let-
ter/Letter-R/Statement)/000 × 000 mm
Standard Paper 1/High-Quality 1/High-Quality 2/
Paper Type 1 - 5
ON
OFF
Auto
A3/A4/B4/B5/A4-R/B5-R/Foolscap(Ledger/Legal/Let-
ter/Letter-R/Statement)/000 × 000 mm
Standard Paper 1/High-Quality 1/High-Quality 2/
Paper Type 1 - 5
ON
OFF
Refer-
ence
p.33
13
/
")
16
p.35
p.36
p.37
p.38
p.38
p.38
2
25
Advertisement
Table of Contents
