Table of Contents
Advertisement
fm.book 73 ページ ２００４年７月１３日 火曜日 午後４時５５分
Original image
Selects line or photo to which priority is given in printing. The optimum colour management is obtained according to the selected
mode. The initial setting is [Photo-based].
Settings
Line-based
Characters and illustrations are clearly printed.
What is Colour Management?
While in the displays such as monitor, colours are expressed with "additive primary colours" (RGB: red, green, and blue), in the printers with
ink, colours are expressed with "subtractive primaries" (CMY: cyan, magenta, and yellow). Since the number of colours that can be expressed
with CMY is smaller than with RGB, colours on the monitor cannot be printed quite the same. For natural reproduction of colour tones, some
conversion technique from RGB to CMY is required. This system of conversion is called colour management. The rules of conversion vary with
the manufacturer, and each manufacturer uses its original conversion table (colour profile).
In colour management of HC5000, some kinds of colour profiles are automatically selected according to the combination of the original image
and the paper type to be used to express the optimum colours.
Colour profiles created and edited with the ColorTune
Duplex printing
Selects whether or not to perform duplex printing. When performing duplex printing, select the binding position.
Settings
OFF (initial setting)
Duplex printing is not performed.
Long edge binding
Duplex printing is performed.
The long edge of the original becomes the binding posi-
tion.
Photo-based
Images such as photos are printed with natural colour
tone.
®
technology licensed from Agfa Monotype Corporation are used.
Short edge binding
Duplex printing is performed.
The short edge of the original becomes the binding posi-
tion.
3
73
Advertisement
Table of Contents
