Materials Not To Be Printed - Riso HC5000T Instruction Manual

Hide thumbs Also See for HC5000T:
Table of Contents

Advertisement

fm.book ix ページ 2004年7月13日 火曜日 午後4時55分
Maximum Print Area (Image Area)
Although printing can be performed into the area inside 1 mm (0.04") from the sides of paper, deterioration of print quality
such as loss of characters or figures and bleeding may occur depending on the original.
Even if the paper size is larger than 316mm × 460mm (12
3
5
458mm (12
/
" × 18
/
8
16

Materials Not to Be Printed

Do not use the machine in any manner which violates the law or infringes on established copyrights, even when making copies
for personal use. Consult your local authorities for further details. In general, use discretion and common sense.
Power Connection
Connect the power plug securely to the electrical outlet to avoid improper connection.
Install the machine near the electrical outlet.
If an optional device is connected to an electrical outlet for option connection on the machine, the optional device is turned on
and off at the same time as the machine.
Sleep
When the machine is on and is not used for a certain time, the machine enters automatically the energy saving (sleep) mode. In
the sleep mode, power consumption is suppressed.
The sleep function is set in "Menu 5 Administration" on the operation panel.
At shipping, the sleep function is enabled and the time for sleep is set to 5 minutes.
"5.8 Initial Setting" p.62
").
7
1
/
" × 18
/
"), the actual maximum printable area is 314mm ×
16
8
ix

Advertisement

Table of Contents
loading

Table of Contents