Table of Contents
Advertisement
fm.book 44 ページ ２００４年７月１３日 火曜日 午後４時５５分
4.8 Paper Ejection
Sets the position and adjustment of the Eject Wing of the Auto Stacking Tray and the Stack Guides.
Settings
4.8.1
Eject Wing
4.8.2
Stack Guide
4.8.3
Stack Guide Adjust
4.8.4
Shifting Guide
If "Auto" or "OFF" has been selected in "4.8.2 Stack Guide," when "4.8.3 Stack Guide Adjust" is selected, the setting of
"4.8.2 Stack Guide" is changed to "Adjusted Position."
The setting of "4.8.3 Stack Guide Adjust" is cancelled and changed to "Auto" in the following cases.
• The power is turned off and then on again.
• Wake-up from the Sleep mode occurs.
• Paper of a different size is selected.
• "Auto" is selected for "4.8.2 Stack Guide."
44
Adjusts the Eject Wing so that the shape changes for proper paper arrangement when printed paper
is ejected.
Auto:
The Eject Wing is automatically adjusted to optimum position based on
the type and size of paper.
Special:
The Eject Wing can be set according to special paper. For details, contact
your local dealer (or service representative).
Selects the method of adjusting the positions of the Side Guides and the End Guide.
Auto:
The positions of the Side Guides and the End Guide are automatically
adjusted according to the type, size, and orientation of paper.
Adjusted Position:
Since the guides of the Auto Stacking Tray move automatically according
to the paper size, the set positions cannot be changed by hand. Use this set-
ting when a little wider (narrower) space is desired depending on the
paper. Set the positions in 4.8.3.
OFF:
The Stack Guides are not adjustable. If paper of larger than 320mm × 432
mm (12
The positions of the Side Guides and End Guide can be specified in 1 mm (0.04") increments when
"Adjusted Position" is selected in "4.8.2 Stack Guide."
Side Guides: -20 (narrower) mm to +20 (wider) mm (-
paper size
End Guide: -20 (to left) mm to +20 (to right) mm (-
When printing is complete, if you press the Stack Guide Open Button, the Stack Guides move out-
ward to allow easy removal of prints. The guides to be moved at this time are specified.
For the Stack Guide Open Button, refer to
End Guide: Only the End Guide moves outward.
Side Guides: Only the Side Guides move outward.
End and Side Guides: Both the End Guide and Side Guides move outward.
5
/
" × 17")is used for printing, set "OFF" and fold the Stack Guide.
8
13
/
"(narrower) to +
16
13
/
"(to left) to +
16
p.4.
13
/
"(wider)) than
16
13
/
"(to right)) from paper size
16
Advertisement
Table of Contents
