Initial Setting - Riso HC5000T Instruction Manual

fm.book 62 ページ ２００４年７月１３日 火曜日 午後４時５５分
11
After checking the message, press
the OK Key.
Message "Registered. Restart Printer" is displayed.
12
Press the power Key to turn off the
power and then on again.

5.8 Initial Setting

Basic setting such as details of sleep, buzzer sound, language, and metric/inch switch is set here.
AAA indicates factory default setting.
Settings
5.8.1
Sleep
5.8.2
Waiting Time
5.8.3
Beep Sound - Key
5.8.4
Beep Sound - Status
5.8.5
Beep Sound - Error
5.8.6
Temp Data Retention
5.8.7
Displayed Language
5.8.8
Metric/Inch Switch
62
Set whether or not to use the sleep mode for suppressing power consumption when the
printer is not used for a certain time.
ON: Sleep is enabled.
OFF: Sleep is disabled.
Set the time that elapses until the printer enters the sleep mode if the sleep function is
enabled.
The time can be set to 1 - 99 minutes.
05
Set whether or not to sound the beeper when a key on the Operation Panel is pressed.
ON: Beep sound is enabled.
OFF: Beep sound is disabled.
Set whether or not to sound the beeper when, for example, printing is completed.
ON: Beep sound is enabled.
OFF: Beep sound is disabled.
Set whether or not to sound the beeper when an error such as paper jam occurs.
ON: Beep sound is enabled.
OFF: Beep sound is disabled.
Set whether or not to retain the data of the last page in the memory until the next job when
printing is complete.
ON: Data is retained.
OFF: Data is not retained.
Set the language displayed on the Operation Panel.
Japanese/UK English/US English/French/German/Italian/Spanish
Select the Metric or Inch unit for display on the Operation Panel.
mm: Displayed in mm.
inch: Displayed in inch.
After message "Shutting Down" disappears and the
Power Key becomes orange, press the Power Key
again to turn ON the power.