Menu 1 Print Position Adjust - Riso HC5000T Instruction Manual

Hide thumbs Also See for HC5000T:
Table of Contents

Advertisement

fm.book 33 ページ 2004年7月13日 火曜日 午後4時55分

Menu 1 Print Position Adjust

Adjusts the print position.
Also the positions can be adjusted for punching and stapling after printing.
Adjustable Range
If you want to shift the print position after checking the printed sheet, use the Cursor Keys on the printer to shift the position.
• With reference to the current print position, you can shift the position between 0mm and 20 mm (0" and
(up and down) and horizontal (to the right and the left) directions.
• You can adjust the position in 0.5 mm (0.02") increments.
• If "4.9 Temp Data Clear" of the menu setting has been executed or if setting of no temporary data has been selected (5.8.6 Temporary
Data Retention), message "No Temp Data" is displayed.
• In duplex printing, the print position moves to the same adjusted position on both the front and back sides. This function is useful for
making margins for binding.
• The setting is effective in additional printing performed with "Menu 3 Temp Data Retrieve."
2
13
/
") in the vertical
16
33

Advertisement

Table of Contents
loading

Table of Contents