Primary Drive Gear And Balance Shaft Gear Removal; Primary Drive Gear And Balance Shaft Gear Check - Husqvarna TE 125 Workshop Manual

pRImARy dRIVE GEAR ANd bALANCE sHAft GEARs REmOVAL
pRImARy dRIVE GEAR ANd bALANCE sHAft GEARs CHECk
Part. N. 8000 H4704 (07-2010)
ENGINE OVERHAUL
1. slacken:
• Primary drive gear nut "1"
• Place the aluminium plate "a" between the balance shaft drive
gear "2" and the balance shaft driven gear "3", then slacken
the primary drive gear nut .
97
2. Unbend the lock washer tab.
3. slacken:
• Balance shaft driven gear nut "1"
• Place the aluminium plate "a" between the balance shaft drive
gear "2" and the balance shaft driven gear "3", then slacken
the balance shaft driven gear nut.
98
1. Check:
• Balance shaft drive gear
• Balance shaft driven gear
Clefts/damage/wear
2. Check:
• Primary drive gear
F1.57
Replace.