Husqvarna TE 125 Workshop Manual page 128

WatEr PUmP dIsassEmBLy
WatEr PUmP ChECK
ENGINE COOLING
1. remove:
• Water pump seal "
• remove the water pump seal from inside the water pump
housing "2".
(see fig.04)
04
2. remove:
• Bearing "1"
• remove the bearing from outside the water pump housing
"2".
(see fig. 05)
05
1. Check:
• Water pump housing cover
• Water pump housing
Cracks/damage
• Impeller shaft
Clefts/damage/wear
• Bearing
Hard movement
• Radiator outlet hose
Cracks/damage
F3.8
1".
Replace.
Change.
Replace.
Replace.
Part. N. 8000 H4704 (07-2010)