Decompression System Check - Husqvarna TE 125 Workshop Manual

dECOmpREssION systEm CHECk

ENGINE OVERHAUL
1. Check:
a.
b. Check that the decompression chamber lever "1" moves easily.
10
c. Without acting on the decompression chamber lever, verify that
d. Move the decompression chamber lever "1" in the direction of
11
F1.8
• Decompression system
Check the decompression system with the camshaft sprocket and
the decompression chamber cam installed in the camshaft.
(see fig. 10)
the decompression chamber cam "2" protrudes from the camshaft
(exhaust cam) as shown in figure 11 "A".
the arrow and verify that the decompression chamber cam does
not protrude from the camshaft (exhaust cam) as shown in figure
11 "B".
Part. N. 8000 H4704 (07-2010)