Husqvarna 2009 TE 250 Owner's Manual page 172

MUM2-250_310_450_510_2009_GB
ADJUSTMENT OF HEADLIGHT (TE- SMR)
When checking the proper orienting of headlight, inflate tires at
right pressure, sat a person on the saddle and place the motorcy-
cle perpendicular with its longitudinal axis 10 meter (33 ft) from
a wall or screen. Then trace an horizontal line equal to the
height of headlight center and a vertical one in line with its lon-
gitudinal axis.
If possibile, execute this operation in a shadowy place.
When the low beam is on, the upper boundary limit between
dark and lit zone should be 9/10 th of headlight center from
groud.
80
21-05-2008 9:39 Pagina 80
Adjust the preadlamp aiming by turning screw (1) to lower or lift
the high beam.
1