Husqvarna 2009 TE 250 Owner's Manual page 135

MUM1-250_310_450_510_2009_GB
OIL FORK LEVEL
For the regular fork operation, both legs must be provided with
the necessary oil quantity. Remove the forkrods form the fork to
check the oil level inside the forkrods. Work as follows:
- remove the power rod caps;
- remove springs from the stems letting the oil drop into the lat-
ter;
- bring forks to stroke end;
- check that the level is at distance "A" below the upper limit of
rods.
OIL QUANTITY IN EACH FORK LEG
- TC: 320 cm 3
(19.5 cu. in.)
- TE: 725 cm 3
(44.2 cu. in.)
- SMR: 740 cm 3
(45.1 cu. in.)
A=100mm (3.94 in.) - SMR
A=120mm (4.72 in.) - TE
A
21-05-2008 9:30 Pagina 43
NOTE
Flexibility index for the serial springs:
K=4,8 N/mm (TE)
K=5 N/mm (TC-SMR)
NOTE
Always replace both the spring and the spacers to keep the
preload value unchanged.
43