COOLANT LEVEL CHECK
Check level (1) in right-hand radiator when engine is cold (place
the motorcycle so that it is perpendicular to the ground). The
coolant should be approximately 10 mm above cells and be-
sides, on TE-TXC and SMR models, it doesn't exceed the middle
of the expansion tank (2) located in front of the rear shock ab-
The radiator cap is provided of two unlocking positions, the first
being for the previous pressure discharge in the cooling system.
Avoid removing radiator cap when engine
is hot, as coolant may spout out and cause
TE-SMR: Because the cooling fan (A)
can be activated even when the start
switch is in OFF position, always keep at a
safe distance from the fan vanes.
Difficulties may arise in eliminating
coolant from varnished surfaces. If this oc-
curs, wash off with water.